NESS Pump vent

Venting pumps safely and without tools

Venting pumps safely and without tools

Thermal oil pumps must be vented during commissioning and on each start up of a plant in order to avoid dry running.
Dry running of the pump would, among other things, damage the mechanical seal and therefore results in a standstill of the pump and the system or even leads to oil leakage and a fire.

Venting the pump usually requires tools, but the work is also not entirely safe for the operating personnel.
For this reason, we have developed a 350°C-resistant pump vent with a needle valve for simple and safe venting.

Suitable for retrofitting KSB, Allweiler, Speck, Sterling and Dickow pumps, among others with 1/4″ thread.

Your advantages at a glance

Temperature resistant venting
Pump vent is temperature resistant up to 350°C
Easy assembly
Easy mounting on the vent plug of the existing pump of all manufacturers.
Easy operation
The pump can be vented without tools and without causing uncontrolled leakage.
Manufacturer-independent retrofittable
The pump vent can be retrofitted to most pumps of common manufacturers